Hallo, ich habe das Problem das Nero7 (Version 7.11.10.0) bei DVD-R brennen nach kurzer Zeit die Meldung "Ungültige Blockadresse" bringt und der Rohling beim Teufel ist. Rohlinge benutzte ich Verbatim DVD-R (MCC 03RG20) und Brenner den Pioneer DVR-212BK (1.24). Das Problem kam so zu sagen übernacht, ohne das ich am System eine Veränderung vorgenommen habe. In diesem System ist auch ein LiteOn DH20A4P verbaut und bei dem tritt es nicht auf.

Nero deinstallieren, Nero GeneralCleanTool benutzten und Nero wieder installieren brachte nix.

Jetzt habe ich auf meinem PC Windows XP mit allen Updates neu installiert aber als das nichts gebracht hat habe ich den Pioneer 212 gegen einen Pioneer DVR-112D (1.24) ausgetausch. Aber nichts von beiden hat das Probelm behoben.

Zur Zeit habe ich noch CopyToDVD und CDBurnerXP installiert. Mit CopyToDVD hab ich keine Probleme aber bei CDBurnerXP wurde der Rohling nur mit Schreibgeschwindigkeit 1x erkannt und dann abgebrochen. Es kann aber an den Einstellungen liegen da ich mit dem Progi nicht auskenne.

Würde mich freuen wenn jemand einen Tip hat

Überprüfe doch mal das Kabel vom Mainboard zum Brenner - ist evtl. defekt

Das mit dem def.Kabel kann es eigentlich nicht sein,da es ja mit <CopytoDVD>funktioniert.Kann man aber schnell kontrollieren,einfach den Pio auf den Platz vom LitOn einbauen und schaun obs dann klappt.

Das Kabel kanns normal nicht sein, da der 212 ein Sata- und der 112 ein IDE-Brenner ist.

Mein Motherboard ist das P5Q und es ist AHCI aktiviert.

Soll ich den Log von Nero hier reinstellen? Vielleicht kann ja da jemand was rauslesen.

Jau - mach mal

Aber bitte OHNE Seriennummer ... Ist leider schon häufig genug vorgekommen ...

Deshalb hab ich lieber vorher gefragt. Die Seriennummer kommt nur am Anfang vor oder?
Ich hab nochmal einen Versucht mit einem SATA zu USB Converter gemacht, aber mit dem selben Ergebnis.

Hier der Log mit dem Pioneer 112 am Mainboard:

Samsung

****-****-****-****-****-****-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-112D>Version: 1.24 - HA 1 TA 0 - 7.11.10.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PIONEER DVD-RW DVR-112D>Version: 1.24 - HA 1 TA 0 - 7.11.10.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD A DH20A4P atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST31000340AS iaStor Port 2 ID 0 DMA: On
DiskPeripheral : WDC WD3200KS-00PFB0 iaStor Port 2 ID 1 DMA: Off
DiskPeripheral : WDC WD7500AAKS-00RBA0 iaStor Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-112D D: CdRom0
ATAPI DVD A DH20A4P E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2096096kB)
Free physical memory: 1517MB (1553552kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.5.2009
ISO Zusammenstellung
18:54:15 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

18:54:15 #2 Text 0 File Isodoc.cpp, Line 6711
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:54:15 #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

18:54:15 #4 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media

18:54:40 #5 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

18:54:40 #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

18:54:42 #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1612559 (358:20.59, 3149MB)

18:54:42 #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

18:54:42 #9 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: PIONEER DVD-RW DVR-112D, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

18:54:42 #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unbekannt. Medium required by compilation: DVD R/RW; DVD DL.)

18:54:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1612560 (1612560) = #1612560/358:20.60
relocatable, disc pos for caching/writing not required/ required
TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1612560 blocks [D: PIONEER DVD-RW DVR-112D]
--------------------------------------------------------------

18:54:42 #12 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [D: PIONEER DVD-RW DVR-112D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3302522880, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1612560 | 0 | 0x00
1612560 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

18:54:42 #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

18:54:42 #14 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

18:54:42 #15 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

18:54:42 #16 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

18:54:42 #17 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

18:54:42 #18 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 12x (16.620 KB/s)

18:54:42 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:54:42 #20 Text 0 File DVDR.cpp, Line 3262
Recording mode: Sequential Recording Mode

18:54:42 #21 Text 0 File DVDR.cpp, Line 3416
Start write address at LBA 0
DVD high compatibility mode: Yes

18:54:42 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x08710140: Len x648

18:54:42 #23 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:54:42 #24 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

18:54:44 #25 Text 0 File Cdrdrv.cpp, Line 1405
18:54:44.015 - D: PIONEER DVD-RW DVR-112D : Queue again later

18:55:28 #26 Text 0 File Cdrdrv.cpp, Line 1405
18:55:28.609 - D: PIONEER DVD-RW DVR-112D : Queue again later

18:55:38 #27 SPTI -1064 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 03 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
Buffer x09990680: Len x10000
0xCF 1F 3E 76 62 A1 EC 22 F0 63 90 42 E6 CB 08 40
0x38 10 FD 35 91 95 D6 93 F0 6A 3E CF 45 77 8E 60
0xD1 19 04 97 47 62 10 80 FA CA AC 19 F8 BC 49 2E

18:55:38 #28 CDR -1064 File Writer.cpp, Line 306
Invalid block address
D: PIONEER DVD-RW DVR-112D

18:55:38 #29 Text 0 File DVDR.cpp, Line 3818
EndDAO: Last written address was 799 (31Fh)

18:55:38 #30 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 12x (16.620 KB/s)

18:55:38 #31 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:55:43 #32 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

18:55:43 #33 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Wo hattest Du den 212 angeschlossen an welchem SATA Port, sicher am Intel oder etwa am Zusatzkontroller von Marvel, der taugt nämlich nix für optischew Laufwerke. Davon betroffen sind natürlich auch IDE Brenner. Mögliche Besserung Standard IDE Treiber verwenden (nur für den Marvel und der muß im IDE Mode laufen) Schon andere Rohlinge probiert ob der Fehler da auftritt? Zusätzliche Sachen installiert die Nero stören können? Wie siehts mit dem Festplattenplatz aus auf dem Deine temprären Nero Verzeichnisse liegen.

Wahrscheinlichste Fehler Rohlingsfehler (auch wenn der LiteOn weniger allergisch reagiert) oder Treiberproblem.

Der 212 hing am Intel. Jetzt ist ein 112 verbaut, bei dem das selbe Problem ist.

Ich hatte vor und nach der Windowsneuinstallation nur den Orginal Treiber drauf.

Rohling hab ich jetzt diese ausprobiert:

Verbatim 16x DVD-R (MCC 03RG20) ging nicht
TDK 1-8x DVD-R (TTG02) ging nicht
Verbatim DVD+RW 4x ging
Alte Verbatim 16x DVD-R (MCC 004) gingen aber er hat beim brennen anfangs die Drehzahl einige mal hoch und runter und schrieb dann langsam, obwohl er 18x brannte, hat er 12 min gebraucht. Das hatte ich früher anders in Erinnerung.

Zusätzliche Sachen die stören würden fallen mir jetzt keine ein. Der Fehler kam ja schon als ich Windows neu drauf (ohne alle Updates) hatte, nur mit XpAntispy, Kaspersky und Fritzbox Startcenter. Jetzt sind hat die 2 oben genannten Brennprogs drauf.

Festplattenplatz sind noch ca.35 GB.

Hab auch Nero geschreiben, die meinten das es nicht an Nero liegt sondern an der Firmware des Brenners und das den Updaten solle. Hab jetzt den 112 auf 1.28 upgedatet aber das Problem bleibt.

Gibt es irgendeine Einstellung im Bios was es sein kann?

Bin schon am überlegen ob ich mir den aktuellen Pioneer 216 mal teste.

Du hast ziemlich offensichtlich ein Systemproblem beim IDE Brenner am Marvel ist das wie schon angedeutet nicht so verwunderlich, eventuelle Lösung hab ich genannt. Wenn Der SATA Brenner genau die gleichen Einbrüche hat und garantiert nicht an einem Marvel SATA Port hing (von denen Dein Board auch 2 farblich abgesetzte hat und was ich doch vermute), dann liegt das noch tiefer. Jedenfalls klappt bei Dir die Datenübertragung (DMA Problem möglicherweise) nicht sauber, weshalb das Tempo nicht gehalten werden kann. Die Brenner sind da nicht das Problem sondern nur die leidtragenden. Daher hilft da ein anderer Brenner gar nichts.

So ich hab noch mal ein paar versuche gemacht:

Hab mal das Bios upgedatet.

Verbatim DVD+R funktionieren tadellos im 112!! Anschließend wieder einen -R eingelegt und der ging nicht. Hab einen bedruckbaren Verbatim DVD-R getestet Fehler.



Jetzt hab den 212 SATA-Brenner zusätzlich eingebaut und der war nicht und ist jetzt auch nicht am Marvel Port. Fehler

Alle IDE ATA/ATAPI Controller deinstalliert-> Neustart 2x Fehler

Von der ASUS Homepage den aktuellen SATA Inteltreiber installiert Fehler

Ich glaub ich hab jetzt schon über 15 Rohlinge verschossen.

Ich heng noch den Log vom letzten SATA Fehlversuch an.

Samsung

****-****-****-****-****-****-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-212> Version: 1.24 - HA 1 TA 2 - 7.11.10.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PIONEER DVD-RW DVR-112D>Version: 1.28 - HA 1 TA 0 - 7.11.10.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD A DH20A4P atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST31000340AS iaStor Port 2 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-212 iaStor Port 2 ID 1 DMA: Off
DiskPeripheral : WDC WD7500AAKS-00RBA0 iaStor Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-112D D: CdRom0
ATAPI DVD A DH20A4P E: CdRom1
PIONEER DVD-RW DVR-212 F: CdRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2096096kB)
Free physical memory: 1536MB (1573548kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.5.2009
UDF/ISO Zusammenstellung
19:33:21 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:33:22 #2 Phase 112 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation started

19:33:22 #3 Phase 114 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation completed (no file modified)

19:33:22 #4 Text 0 File Isodoc.cpp, Line 6711
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

19:33:22 #5 Phase 111 File dlgbrnst.cpp, Line 1767
DVD-Video files sorted

19:33:22 #6 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

19:33:22 #7 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

19:33:22 #8 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media

19:33:55 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

19:33:55 #10 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

19:33:55 #11 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

19:33:57 #12 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1670511 (371:13.36, 3262MB)

19:33:57 #13 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

19:33:57 #14 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: PIONEER DVD-RW DVR-212, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

19:33:57 #15 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unbekannt. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)

19:33:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1670512 (1670512) = #1670512/371:13.37
relocatable, disc pos for caching/writing not required/ required
TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1670512 blocks [F: PIONEER DVD-RW DVR-212]
--------------------------------------------------------------

19:33:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [F: PIONEER DVD-RW DVR-212] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3421208576, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1670512 | 0 | 0x00
1670512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:33:57 #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

19:33:57 #19 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

19:33:57 #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

19:33:57 #21 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

19:33:57 #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

19:33:57 #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 12x (16.620 KB/s)

19:33:57 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:33:57 #25 Text 0 File DVDR.cpp, Line 3262
Recording mode: Sequential Recording Mode

19:33:57 #26 Text 0 File DVDR.cpp, Line 3416
Start write address at LBA 0
DVD high compatibility mode: Yes

19:33:57 #27 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x048e0940: Len x648

19:33:57 #28 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@┴²×ÏR..à...Ü..
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 ............çx..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .ò...x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 ....ågà...½:â.2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ...ð......$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.).ùÁ.........
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.).ùÁ.........
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./.ùÁ...ä.....
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+.¬Á...ä.....
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:33:57 #29 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

19:34:51 #30 SPTI -1064 File SCSIPassThrough.cpp, Line 181
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 03 80 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
Buffer x09bd0740: Len x10000
0x00 00 01 BA 44 12 FF AD B6 03 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 79 25 D1 A0 02 BA 23 21 A2
0x67 0F 04 A0 01 9A 1F 76 3E 9A 6C 42 4A 24 16 08

19:34:51 #31 CDR -1064 File Writer.cpp, Line 306
Invalid block address
F: PIONEER DVD-RW DVR-212

19:34:51 #32 Text 0 File DVDR.cpp, Line 3818
EndDAO: Last written address was 895 (37Fh)

19:34:51 #33 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 12x (16.620 KB/s)

19:34:51 #34 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:34:55 #35 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

19:34:55 #36 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Wollte jetzt auch den 212 auf eine neue Firmware updaten, dann kam aber die Meldung "Hardware Revision is not matched". Soll das heißen das die Firmware nicht zu dem Brenner passt?

Bin auch am überlegen ob ich ein anderes Mainboard ausprobiere. Hab noch ein Gigabyte P35 rumliegen.

Ich hab den Fehler gefunden!!!

Es ist der Datei Anti Virus meiner Kaspersky Internet Security.

Gestern hab ich das andere Mainboard eingebaut, Windows und Nero neu installiert. Kein Problem. Heute hab ich Kaspersky installiert und schon war es wieder da. Hab jetzt Schritt für Schritt alle Schutzmaßnahmen ausgeschaltet (und nochmals eine Menge Rohlinge verballert) und als der Datei Anti Virus aus war, war das Problem auch weg.

Werd jetzt mal an Kaspersky schreiben, aber ob die eine Lösung haben glaub ich nicht.