hallo,
ich habe mir einen gebrauchten PX 760 A gekauft.
egal ob cd, cd-rw, dvd, dvd-rw, ständig erfolgt ein brennabbruch mit o.e. fehlermeldung.
was ist das, und kann ich das eventuell beheben?
danke mfg pedi

Der Fehler dürfte wohl nicht zu beheben sein. Da ist wohl die Laserdiode platt.
Du könntest als Ultima Ratio mal noch einen anderen Rohling testen, oder versuchen, die Linse des Abtasters zu reinigen. Wenn´s dann nicht geht, wars das mit dem Laufwerk.
Gruss
Fuxe

wäre ärgerlich, wenn das teil defekt wäre.

9X03-016C-MXEX-4536-T0L7-2W2T-****-****

Windows 7 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.07 - HA 1 TA 0 - 10.0.10.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <HL-DT-ST BD-RE BH10LS30 >Version: 1.01 - HA 1 TA 1 - 10.0.10.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A 8.01 Pnp680r Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A F: CdRom0
HL-DT-ST BD-RE BH10LS30 H: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 17 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.10.2011
DVD-Image brennen
00:40:01 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

00:40:02 #2 SPTI -1195 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x049d2200: Len x20

00:40:02 #3 SPTI -1195 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x049d2200: Len x20

00:40:02 #4 SPTI -1195 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x049d2200: Len x20

00:40:02 #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

00:40:02 #6 SPTI -1195 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x049d2200: Len x20

00:40:02 #7 SPTI -1195 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x049d2200: Len x20

00:40:02 #8 SPTI -1195 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01
Buffer x049d2200: Len x20

00:40:56 #9 Text 0 File DlgWaitCD.cpp, Line 314
[F: DVDR PX-760A ] Last possible write address on media: 2295103
Last address to be written: 2229829

00:40:56 #10 Text 0 File DlgWaitCD.cpp, Line 326
[F: DVDR PX-760A ] Write in overburning mode: NO (enabled: CD)

00:40:56 #11 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+RW
Disc Manufacturer ID: <PHILIPS>, Media Type ID: <041>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

00:40:56 #12 Text 0 File DlgWaitCD.cpp, Line 499
[F: DVDR PX-760A ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unbekannt. Medium required by compilation: DVD R/RW; DVD DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD DL.)

00:40:56 #13 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2229830 (2229830) = #2229830/495:31.5
not relocatable, disc pos for caching/writing not required/not required
TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2229830 blocks [F: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

00:40:56 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1001
Prepare [F: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4566691840, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2229830 | 2229830 | 0x00
2229830 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: DVD+RW

00:40:56 #15 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

00:40:56 #16 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

00:40:56 #17 PHASE 24 File dlgbrnst.cpp, Line 1827
Caching of files started

00:40:56 #18 Text 0 File Burncd.cpp, Line 4400
Cache writing successful.

00:40:56 #19 PHASE 25 File dlgbrnst.cpp, Line 1827
Caching of files completed

00:40:56 #20 PHASE 36 File dlgbrnst.cpp, Line 1827
Burn process started at 4x (5.540 KB/s)

00:40:56 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

00:40:56 #22 Text 0 File Cdrdrv.cpp, Line 10559
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25FCBF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..783]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
01 00 17 38 00 28 8B 46 - 02 2C 00 2E 8A 3A 02 2C ...8.(.F.,...:.,
00 2C 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 .,.<.,(5P...@...
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00:40:56 #23 Text 0 File DVDR.cpp, Line 5894
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Book Type setting not supported for the loaded disc type

00:40:56 #24 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes

00:40:56 #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

00:40:58 #26 Text 0 File Cdrdrv.cpp, Line 1275
00:40:58.009 - F: PLEXTOR DVDR PX-760A : Queue again later

00:41:12 #27 SPTI -1106 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x10020080: Len x10000
0x01 00 02 00 8B 00 00 00 FF 78 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 56 4F 4F 44 4F 4F 5F
0x43 55 52 53 45 5F 4C 45 47 42 41 53 5F 52 41 43

00:41:12 #28 TRANSFER -60 File ThreadedTransfer.cpp, Line 1222

00:41:12 #29 CDR -1106 File Writer.cpp, Line 327
Power calibration error
F: PLEXTOR DVDR PX-760A

00:41:12 #30 Text 0 File DVDPlusRW.cpp, Line 901
EndDAO: Last written address 32

00:41:12 #31 Text 0 File DVDR.cpp, Line 5894
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Book Type setting not supported for the loaded disc type

00:41:12 #32 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0

00:41:12 #33 PHASE 38 File dlgbrnst.cpp, Line 1827
Burn process failed at 4x (5.540 KB/s)

00:41:12 #34 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

00:41:12 #35 Text 0 File Cdrdrv.cpp, Line 11916
DriveLocker: UnLockVolume completed

00:41:12 #36 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
vielleicht kann jemand etwas damit anfangen.

9X03-016C-MXEX-4536-T0L7-2W2T-****-****

Windows 7 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.07 - HA 1 TA 0 - 10.0.10.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <HL-DT-ST BD-RE BH10LS30 >Version: 1.01 - HA 1 TA 1 - 10.0.10.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A 8.01 Pnp680r Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A F: CdRom0
HL-DT-ST BD-RE BH10LS30 H: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 18 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.10.2011
CD-ROM (ISO)
00:48:41 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

00:48:41 #2 Text 0 File Isodoc.cpp, Line 6956
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

00:48:41 #3 Text 0 File Burncd.cpp, Line 3238
PLEXTOR DVDR PX-760A
BURN-Proof aktiviert

00:48:41 #4 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

00:48:41 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x04aa35c0: Len x20

00:48:41 #6 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x04aa35c0: Len x20

00:48:41 #7 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x04aa35c0: Len x20

00:48:41 #8 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media

00:48:41 #9 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x04aa35c0: Len x20

00:48:41 #10 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x04aa35c0: Len x20

00:48:41 #11 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x04aa35c0: Len x20

00:52:11 #12 PHASE 40 File dlgbrnst.cpp, Line 1827
Aborted by user

00:52:11 #13 Text 0 File DlgWaitCD.cpp, Line 326
[F: DVDR PX-760A ] Write in overburning mode: NO (enabled: CD)

00:52:11 #14 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: PLEXTOR DVDR PX-760A
Medium not present

00:52:11 #15 Text 0 File DlgWaitCD.cpp, Line 499
[F: DVDR PX-760A ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unbekannt. Medium required by compilation: CD-R/RW.)

00:52:11 #16 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

und das hier von einer cd-rw, die etwa 5 minuten im brenner war, und nichts hat sich gerührt.

habe mir extra neue RWs gekauft.
wurden nach schnellem formatieren gebrannt. beim erneuten brennen kam wieder der berühmte fehler.
der brenner ist eben nicht einwandfrei, sondern defekt. ist nicht der erste plextor den ich habe, sowohl der 712 und der 716 brannten RWs ohne probleme.
Windows 7 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100

Recorder: <PLEXTOR DVDR PX-760A> Version: 1.07 - HA 1 TA 0 - 10.0.10.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <HL-DT-ST BD-RE BH10LS30 >Version: 1.01 - HA 1 TA 1 - 10.0.10.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-112L1.28 Pnp680r Port 4 ID 0 DMA: Off
DiskPeripheral : ST3160021A 8.01 Pnp680r Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A F: CdRom0
HL-DT-ST BD-RE BH10LS30 H: CdRom1
PIONEER DVD-RW DVR-112L G: CdRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 16 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.10.2011
UDF/ISO Zusammenstellung
15:48:24 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:48:25 #2 PHASE 114 File dlgbrnst.cpp, Line 1827
DVD-Video files reallocation completed (no file modified)

15:48:25 #3 Text 0 File Isodoc.cpp, Line 6956
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:48:25 #4 PHASE 111 File dlgbrnst.cpp, Line 1827
DVD-Video files sorted

15:48:25 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:25 #6 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x25 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x08725740: Len x8

15:48:25 #7 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

15:48:25 #8 Text 0 File compose.cpp, Line 874
GenUDF2: 1 transfer items prepared.

15:48:25 #9 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

15:48:25 #10 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:25 #11 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:25 #12 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:25 #13 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

15:48:25 #14 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:25 #15 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:25 #16 SPTI -1196 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x02e737c0: Len x20

15:48:54 #17 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

15:48:54 #18 Text 0 File compose.cpp, Line 874
GenUDF2: 1 transfer items prepared.

15:48:54 #19 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)

15:49:00 #20 Text 0 File DlgWaitCD.cpp, Line 314
[F: DVDR PX-760A ] Last possible write address on media: 2295103
Last address to be written: 2082127

15:49:00 #21 Text 0 File DlgWaitCD.cpp, Line 326
[F: DVDR PX-760A ] Write in overburning mode: NO (enabled: CD)

15:49:00 #22 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+RW
Disc Manufacturer ID: <RITEK>, Media Type ID: <004>, Product revision number: 48
Disc Application Code: 0, Extended Information Indicators: 1

15:49:00 #23 Text 0 File DlgWaitCD.cpp, Line 499
[F: DVDR PX-760A ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unbekannt. Medium required by compilation: DVD R/RW; DVD DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD DL.)

15:49:00 #24 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2082128 (2082128) = #2082128/462:41.53
relocatable, disc pos for caching/writing not required/ required
TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2082128 blocks [F: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

15:49:00 #25 Text 0 File Burncd.cpp, Line 4186
Kann die aktuelle Disk nur mit 5.540 KB/s anstelle von 11.080 KB/s beschreiben.

15:49:00 #26 Text 0 File ThreadedTransferInterface.cpp, Line 1001
Prepare [F: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4264198144, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2082128 | 0 | 0x00
2082128 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: DVD+RW

15:49:00 #27 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:49:00 #28 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

15:49:00 #29 PHASE 24 File dlgbrnst.cpp, Line 1827
Caching of files started

15:49:00 #30 Text 0 File Burncd.cpp, Line 4400
Cache writing successful.

15:49:00 #31 PHASE 25 File dlgbrnst.cpp, Line 1827
Caching of files completed

15:49:00 #32 PHASE 36 File dlgbrnst.cpp, Line 1827
Burn process started at 4x (5.540 KB/s)

15:49:00 #33 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:49:00 #34 Text 0 File Cdrdrv.cpp, Line 10559
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Twin Format Flag: 0
Media Specific [16..783]:
00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
01 00 17 38 00 28 A5 46 - 02 2C 00 2F 94 3A 02 2C ...8.(.F.,./.:.,
00 2E A3 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 ...<.,(5P...@...
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:49:00 #35 Text 0 File DVDR.cpp, Line 5894
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Book Type setting not supported for the loaded disc type

15:49:00 #36 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes

15:49:00 #37 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

15:49:00 #38 Text 0 File CUDFTransferItem2.cpp, Line 718

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 2082128
Session Start: Sector 0
Volume Structure: Sector [0, 261] (262 Sectors)
Meta Data: Sector [262, 286] (25 Sectors)
Data: Sector [287, 2081844] (2081558 Sectors)
After Data: Sector [2081845, 2081855] (11 Sectors)
Trailer Track: Sector [2081856, 2082127] (272 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 10-31-2011 15:48:54
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: DVDVideo
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 2295104
Multi Session Mode: None
Disc Type: DVD+RW
OS Class: 0
Volume ID: Neu
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 1
ECC Block Length: 16
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 16
Make Writable: 0
Access Type: Read-only

15:49:01 #39 Text 0 File Cdrdrv.cpp, Line 1275
15:49:01.424 - F: PLEXTOR DVDR PX-760A : Queue again later

15:49:15 #40 SPTI -1039 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09 02
Buffer x10020080: Len x10000
0x01 00 02 00 A4 00 00 00 32 5E F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 4E 65 75 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

15:49:15 #41 TRANSFER -20 File ThreadedTransfer.cpp, Line 1222
Could not perform Write

15:49:15 #42 CDR -1039 File Writer.cpp, Line 327
Focus or tracking error
F: PLEXTOR DVDR PX-760A

15:49:15 #43 Text 0 File DVDPlusRW.cpp, Line 901
EndDAO: Last written address 32

15:49:15 #44 Text 0 File DVDR.cpp, Line 5894
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Book Type setting not supported for the loaded disc type

15:49:15 #45 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0

15:49:15 #46 PHASE 38 File dlgbrnst.cpp, Line 1827
Burn process failed at 4x (5.540 KB/s)

15:49:15 #47 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:49:15 #48 Text 0 File Cdrdrv.cpp, Line 11916
DriveLocker: UnLockVolume completed

15:49:15 #49 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Mit dieser Nero Version gibt es allgemein viele Probleme das Support Forum is voll damit

mach mal ein Update auf ""Nero-10.6.11300"" über das "Nero Control-Center"


edit: ach... sorry... kannst du ja nicht der Serial ist ja geklaut